A run is a continuous time interval during which the CTA_SST1M telescope is usually pointing to a fixed position in the sky.
A typical run has a duration of 20 minutes.
The CTA_SST1M RUN catalog allows to search for runs based on a set of selection keywords.
To each run corresponds a FITS file grouping the CTA_SST1M camera raw data and the relevant slow control auxiliary files.
All these data are stored in FITS format.
The Data are only accessible if publicly available.
ID
ID of the data.
RUNTYPE
type of this run.
EXPOSURE
duration of the observation, in seconds
MAXRATE
maximum trigger rate, in Hz
Event_Rate
median trigger rate, in Hz
MINRATE
minimum trigger rate, in Hz
NOTHERTG
number of unknown trigger events
NTRIGEXT
number of forced trigger event
NTRIGINT
number of internal trigger events (i.e. physics events)
TARGET
name of the target, if any
TSTART
time of first events, in nanoseconds (currently from unix-time epoch)
TSTOP
time of the last event, in nanoseconds (currently from unix-time epoch)
NEVTS
number of events in this file
VERSION
version of the software package that took the data
RAMIN
minimum right-ascension, in H:M:S ??
RAMAX
maximum right-ascension, in H:M:S
RA
average right-ascension, in H:M:S
DECMIN
minimum declination, in Deg:M:S
DECMAX
maximum declination, in Deg:M:S
DEC
average declination, in Deg:M:S
AZMIN
minimum azimuth pointing, in radians
AZMAX
maximum azimuth pointing, in radians
AZIMUT
average azimuth pointing, in radians
ALTMIN
minimum altitude pointing, in radians
ALTMAX
maximum altitude pointing, in radians
ELEVATION
average altitude pointing, in radians
THREMIN
minimum trigger threshold, in ADC counts
THREMAX
maximum trigger threshold, in ADC counts
THREMED
median trigger threshold, in ADC counts
PS
Proprietary Stauts, private or public
THRE7MIN
Patch-7 limite de trigger (en nombre du compteur ADC - TBC)
LIDMIN
Status du couvercle de la camera (ENUM)
READOUT_DELAY_MIN
nombre d'echantillons de delai entre le trigger et le debut de la lecture de donnees
READOUT_WINDOW_MIN
longeur de la fenetre de lecture, en echantillons
CLIPPING_LEVEL_MIN
valeur max des pixels avant clipping (en compteur ADC)
TRIGGER_ENABLED_MIN
boolean disant si le trigger est active ou pas
TRIGGER_MODE_MIN
mode de declenchement de la camera (trigger mode)